Brake Solutions for Ford 8.8" C-clip Rear Ends
(Mustangs and Replicars 86-98 rear ends)
North Racecars offers a variety of disc brake solutions. Whether you need 4-Lug, SN95 (94-98 Mustang) GT/V6 or Cobra, we've got you covered!
- All North Racecars (NRC) brake kits retain FOX Track (Same width as drums).
- All NRC parts for 8.8" rear ends work with C-clip Eliminators.
Patent Information: Parts shown within the NorthRacecars.com website are protected under United States patent laws. North Racecars, Inc. will defend its ownership of all designs and any attempt to duplicate or otherwise copy designs will be pursued to the fullest. (This includes changing shape or materials.)
Please Click Here and Read Before Calling or Emailing!
Call: 816-436-1610 Email: richard@northracecars.com
Click for Detailed Rear Disc Installation Instructions w/Pictures
Pictures are for illustrative purposes only. Kits include appropriate parts for their application. For example, 4-lug kits come with 4-lug rotors, even though the associated image may show 5-lug.
NOTE: Shipping costs are currently volatile & rising from our past experience, likely due to the rapid increases in oil prices & inflation in other carrier costs like labor. So please be aware that all orders may incur higher shipping charges. If we find this to be the case with your order, we will contact you for the additional cost before shipping.
Rear Brackets Only
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
4-Lug
- Retains standard axles.
- Uses Turbo Coupe rear brakes.
$180 + $10 Shipping = $190 Total
Cobra
- Retains Mustang offset.
- For use with 11.65" rotor and Cobra caliper.
$180 + $10 Shipping = $190 Total
SN95 GT/V6
- Retains FX track width.
- For use with 10.6" rotor and GT/V6 caliper.
$180 + $10 Shipping = $190 Total
Rear Brackets & Yukon 28 Spline Axles
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Yukon 28 spline axles with studs installed.
4-Lug
Not Applicable (use existing axles).
Cobra
$385 + $60 Shipping = $445 Total
SN95 GT/V6
$385 + $60 Shipping = $445 Total
Rear Brackets & Moser 31 Spline Axles
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Moser 31 spline axles with studs installed.
4-Lug
Not Applicable (use existing axles).
Cobra
$455 + $60 Shipping = $515 Total
SN95 GT/V6
$455 + $60 Shipping = $515 Total
Rear Brackets & Cables
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
4-Lug
$240 + $20 Shipping = $260 Total
Cobra
$240 + $20 Shipping = $260 Total
SN95 GT/V6
$240 + $20 Shipping = $260 Total
Rear Brackets, Cables & Yukon 28 Spline Axles
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Yukon 28 spline axles with studs installed.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
4-Lug
Not Applicable (use existing axles).
Cobra
$470 + $60 Shipping = $530 Total
SN95 GT/V6
$470 + $60 Shipping = $530 Total
Rear Brackets, Cables & Moser 31 Spline Axles
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Moser 31 spline axles with studs installed.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
4-Lug
Not Applicable (use existing axles).
Cobra
$535 + $60 Shipping = $595 Total
SN95 GT/V6
$535 + $60 Shipping = $595 Total
Rear Complete Kit (without Axles)
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
- One (1) pair loaded calipers with mounting bracket and pads, include banjo bolt.
- One (1) pair soft brake hoses to adapt brakes from hard line and mount to caliper.
- One (1) pair brake rotors.
4-Lug
$599 + $91 Shipping = $690 Total
Cobra
$599 + $91 Shipping = $690 Total
SN95 GT/V6
$599 + $91 Shipping = $690 Total
Rear Complete Kit with Braided Steel Brake Hoses (without Axles)
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
- One (1) pair loaded calipers with mounting bracket and pads, include banjo bolt.
- Three (3) Braided steel soft brake hoses to adapt brakes from hard line and mount to caliper. Also includes center line, from Maximum Motorsports.
- One (1) pair brake rotors.
4-Lug
$749 + $91 Shipping = $840 Total
Cobra
$749 + $91 Shipping = $840 Total
SN95 GT/V6
$749 + $91 Shipping = $840 Total
Rear Complete Kit with Yukon 28 Spline Axles
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Yukon 28 spline axles with studs installed.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
- One (1) pair loaded calipers with mounting bracket and pads, include banjo bolt.
- One (1) pair soft brake hoses to adapt brakes from hard line and mount to caliper.
- One (1) pair brake rotors.
4-Lug
Not Applicable (use existing axles).
Cobra
$799 + $141 Shipping = $940 Total
SN95 GT/V6
$799 + $141 Shipping = $940 Total
Rear Complete Kit with Moser 31 Spline Axles
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Moser 31 spline axles with studs installed.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
- One (1) pair loaded calipers with mounting bracket and pads, include banjo bolt.
- One (1) pair soft brake hoses to adapt brakes from hard line and mount to caliper.
- One (1) pair brake rotors.
4-Lug
Not Applicable (use existing axles).
Cobra
$874 + $141 Shipping = $1,015 Total
SN95 GT/V6
$874 + $141 Shipping = $1,015 Total
Rear Complete Kit with Yukon 28 Spline Axles & Braided Steel Brake Hoses
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Yukon 28 spline axles with studs installed.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
- One (1) pair loaded calipers with mounting bracket and pads, include banjo bolt.
- Three (3) Braided steel soft brake hoses to adapt brakes from hard line and mount to caliper. Also includes center line, from Maximum Motorsports.
- One (1) pair brake rotors.
4-Lug
Not Applicable (use existing axles).
Cobra
$989 + $141 Shipping = $1,130 Total
SN95 GT/V6
$989 + $141 Shipping = $1,130 Total
Rear Complete Kit with Moser 31 Spline Axles & Braided Steel Brake Hoses
Includes:
- One (1) pair patented brackets with caliper mounting hardware and conversion fittings.
- One (1) pair hub centric Moser 31 spline axles with studs installed.
- One (1) pair Parking brake cables FOX with rear discs. Not available at parts store.
- One (1) pair loaded calipers with mounting bracket and pads, include banjo bolt.
- Three (3) Braided steel soft brake hoses to adapt brakes from hard line and mount to caliper. Also includes center line, from Maximum Motorsports.
- One (1) pair brake rotors.
4-Lug
Not Applicable (use existing axles).
Cobra
$1,024 + $141 Shipping = $1,165 Total
SN95 GT/V6
$1,024 + $141 Shipping = $1,165 Total
Rear FOX Length 5-Lug Axles
FOX Length 5-Lug Axles
FOX length axles with the correct hub for disc brakes (SN95 diameter).
$250 + $60 Shipping = $310 Total
Rear Cables
Cables
Standard cable from all 79-92 Mustang applications.
$89 + $11 Shipping = $100 Total
Front Big Brake Kit
BIG (13) front brake kits that are worth the money! This kit will compliment our rear kit perfectly. What you get is everything you need to convert to big brakes on the front of your Mustang or Factory Five!
Front Big Brake Kit Includes:
- 2 NEW 13 inch rotors vented (not cross drilled or slotted).
- 2 NEW Aluminum Twin piston calipers with mounting brackets and pads (they are blank -- they do not say Cobra).
- 2 NEW banjo bolts and crush washers.
- 2 Maximum Motorsports brake line kits. Allow the use of the Stock FOX inner (chassis side) fitting with SN outer (caliper side) banjo. No cutting and flaring, no adapters.
FOX
For installation on a FOX Body (1987-93), use 1994 or 95 Mustang spindles (not 96 and later). SPINDLES ARE NOT INCLUDED IN KIT!
$499 + $111 Shipping = $610 Total
Ford, Ford Racing, Mustang, Cobra, Factory Five Racing (FFR), Porsche, iPOD, and any other commonly known marques not listed are registered trademarks of other companies. North Racecars, Inc. is not related to the aforementioned companies, and operates as its own distinct entity.